FEATURES: Electric DragonFlyer Helicopter:
Black plastic main drive gear
EM150 size electric motor
Tail boom constructed of composite material
Black plastic main rotor blades
Tail motor and Orange tail rotor blades
Black aluminum landing, plastic landing skids
Gray lexan canopy, with applied decal
Aluminum main shaft
Lime green motor heatsink, Black plastic tail motor heatsink
Two stick, 4-channel, Mode II, FM radio and receiver:
Two Micro servos, compatible with JR, Hitec, Futaba, Airtronics
Transmitter includes a NiCd battery for receiver and transmitter
Charger for transmitter included
Six channel FM receiver
PHA-01 3-1 in 1 Mixer for the Electric Helicopter:
Combines the gyro, mixer and speed controller into one easy unit
Gyro has manual gain control, servo reversing, mixer

INCLUDES: One Mini DragonFlyer
One 4-channel FM transmitter and receiver
One six sided hexagon battery, 8.4V, 750mAh, NiMH battery pack
battery uses a Red BEC connector
One 3-in-1 mixer
One GWS charger for transmitter and receiver
Instructions

REQUIRES: Charger for charging the helicopter battery

SPECS: Diameter of main rotary blade: 20" (510mm)
Length of airframe: 18.5" (470mm)
Maximum flying weight: 12.3oz (350g)
GWS 4-channel radio system
FM only
RF Power: Approximatetly: 250mW
GWS transmitter
Current drain: 100mA
Control range 1.5 +/- .5 miles
Low Battery Indicator: Below 8.8V (LED turn to Red)
Transmitter Charger: 120V AC, 60Hz
AC adapter
Input: 120V, AC 60Hz
Tx 9.6V, charge rate: 60mA
Rx 4.8V, charge rate: 60mA
EM150 specs- volts- 8.4V
amps- 6.0A
thrust- 440g (15.52oz)
power- 50.40 watts
efficiency- 8.73 g/w (308 oz/kw)